Place the grounding cable clamp around the negative battery lead. Align the top edge of the panel and press the panel around the edges to lock it back into place. Replace the dash trim panel that surrounds the stereo.
They will snap back into place, securing the new stereo into the Astro's dock. Fasten the four clips surrounding the stereo by hand. Insert the new stereo deck into the mounting dock of the vehicle. The wiring harness leads will be clearly marked (by abbreviation or color code) to show where the appropriate connections are to be made. Connect the wiring harness adapter leads to the new stereo. Pull the speaker wiring by the binders, not the wires themselves.Ĭonnect the stereo wiring from the Astro to a wiring harness adapter. The antenna and power supply cables are single wires, and the speaker wires are bundled together by a plastic wire binder. Pull the stereo from the mounting dock far enough to access the wiring connections in the back. The four clips can be pried open by a trim panel tool or flat-head screwdriver.
#Astro saber antenna adapter free#
Grab the panel at the bottom edge and work your hands around the perimeter until the panel is completely free from the dash.ĭisengage the four clips around the stereo.
The trim panel snaps away from the dash by hand. Remove the dash trim panel from the center console of the vehicle. Remove the clamp from the negative lead post and rest it away from the battery until the installation is complete. Use a Phillips-head screwdriver to loosen the grounding cable's clamp. Disconnect the negative battery cable (or grounding cable) from the Astro's negative battery lead.
0 kommentar(er)
